OBD Auto Doctor

OBD Auto Doctor

By Creosys

  • Category: Utilities
  • Release Date: 2014-09-07
  • Current Version: 3.1.6
  • Adult Rating: 4+
  • File Size: 32.30 MB
  • Developer: Creosys
  • Compatibility: Requires iOS 9.0 or later.
Score: 4
4
From 268 Ratings

Description

OBD Auto Doctor is the leading OBD2 car diagnostics tool in your pocket! Ever wonder why the check engine light or MIL keeps going on? Check and reset the trouble codes with OBD Auto Doctor. With this OBD2 diagnostic app, you can communicate with your car's OBD-II system quick and easy, and turn your mobile into a highly capable automotive scanner. ▸ OBD Auto Doctor is an ideal app for everyone interested in getting to know their car better. Whether you want to monitor vehicle data in real-time or reset the "check engine" light, this is a must-have tool and the only OBD-II software you need! Capabilities and benefits: • Read readiness monitor status to make sure your car is ready for emissions testing • Read On-Board Diagnostic Monitors for advanced diagnostics • Read Diagnostic Trouble Codes (DTCs), Freeze Frame, and clear the codes and MIL • Monitor fuel consumption while you drive and save money on gas/diesel • View OBD-II parameter and sensor data in real-time to detect abnormalities • Monitor OBD-II sensor data in numerical or graphical presentation • Support for multiple electronic control units such as engine, transmission, etc. Some additional features: • Send diagnostic data via email • Record and send sensor data via email as .csv format • Read Vehicle Identification Number, Calibration Identifications and Calibration Verification Numbers of ECU • Build-in DTC database with over 18000 trouble codes including thousands of manufacturer specific codes • Support for both imperial (English) and metric units Check the Quick Start Guide to get started: • WiFi adapters: https://www.obdautodoctor.com/OBD-Auto-Doctor-Quick-Start-Guide-iPhone-WiFi.pdf • Bluetooth adapters: https://www.obdautodoctor.com/OBD-Auto-Doctor-Quick-Start-Guide-iPhone-Bluetooth.pdf OBD Auto Doctor supports all cars sold worldwide that are compatible with OBD2 or EOBD. As a general guideline, your car is most likely to be OBD-II compliant if it fulfils one of the requirements listed below: • USA: All cars and light trucks manufactured since 1996 (OBD2) • EU, Gasoline: Registered in the EU after 1 January 2001 (EOBD) • EU, Diesel: Registered in the EU after 1 January 2004 (EOBD) • See https://www.obdautodoctor.com/faq for the OBD2 compatibility info for other countries NOTE: OBD Auto Doctor requires a separate ELM Wifi OBD2 adapter (ELM327 compatible scan tool) or Kiwi 3, Carista, Vgate, LELink, Viecar, Tonwon, Veepeak or MicroTech Bluetooth Low Energy adapter to communicate with vehicle. NOTE: Please notice that most of the features of the app require that your car supports them too. ▸ This app is free but to unlock all the features, a subscription is required. Check the app website for more information and differences between the versions. Under no circumstances will the developer of this application be held responsible for incidents resulting from the use and/or interpretation of the data in the application. If you have any issues or concerns, we are happy to help you out. Just send us e-mail to support@obdautodoctor.com. Visit the OBD Auto Doctor website for more information: https://www.obdautodoctor.com/ Legal: Duration and price of each subscription are shown in OBD Auto Doctor's storefront, updated at the time of purchase. The subscriptions are for OBD Auto Doctor Pro version for iOS platform. Payment will be charged to iTunes Account at confirmation of purchase. Subscriptions automatically renews unless auto-renew is turned off at least 24-hours before the end of the current period. Account will be charged for renewal within 24-hours prior to the end of the current period, and identify the cost of the renewal. Subscriptions and auto-renewal can be managed/turned off in the iTunes Account Settings. Terms of use: https://www.obdautodoctor.com/terms

qoinpro.com: cryptocurrecy coin

Screenshots

Reviews

  • Sorry, yes, OBD2 should detect airbag!

    1
    By PMR711
    Thank you for your reply, in which you explain to me that „airbag has nothing to do with OBD2“. Now that explains me why your software doesn’t work - if you as the software developer don’t know that OBD2 is indeed the only existing interface for exactly this purpose and many other purposes and that is used by ALL professional car workshops to detect ANY error in the cars and to reset/erase ANY error code. As you don’t know that this is the case, no wonder that your software cannot know... For my purpose therefore complete waste of money and time!
  • Connection issues

    2
    By apta
    I tried these 4 apps: OBD Auto Doctor, iOBD2, OBD2 Expert, and Car Scanner. The adapter I used is a Kobra Wireless that uses WiFi to connect to an app. OBD Auto Doctor connected successfully once but then couldn't get it to do so again after half a dozen attempts. OBD2 Expert was a no-go from the start since it wanted several $s to even get to the connection window. iOBD2 did not connect successfully. The only thing the app shows is a little banner while attempting to connect and then shows Connection Failure. Only Car Scanner was able to connect everytime and provided LOTS (183 sensors) of useful information about the car and, importantly, for free. Although there are very unintrusive advertisements on the bottom of the screen, one can upgrade to the Pro version for a donation varying from $2.99 to 4.99 - your choice!
  • Not Satisfied At All

    1
    By ShelbyLt
    The description given of the “free app” is very misleading! I thought it would do much more than read codes. Also,the app did not connect the way the instructions said to, but I figured out how to get it connected. It is free, but they mislead you into expecting much more than a simple code reader. “Basic” won’t clear codes or show gauges as described! If they change the description I will be willing to rate them higher.
  • Not good

    2
    By 6140280
    Free version does not clear trouble codes. I will find another rap. Luckily I have a scan tool that I bought for $100 years ago that will suffice.
  • Expensive

    3
    By ArnieNYC
    It’s great software but it’s a bit expensive. Especially when there are a lot cheaper options that will do just about the same thing.
  • Scam

    1
    By Fejnoswal
    20 a year to have the “pro” features like resetting the CEL? A big scam if u ask me
  • Gauges

    3
    By Alireza_Emami
    Hi there , please add info gauges ! Please ! I bought full version and i don’t see any live gauges ! It’s really useful and necessary , please make me and lot of other users happier! I’ll give you 5 star and best review possible if you do that , and also i’ll be so much thankful!
  • Disappointing

    3
    By Drs137
    No problem connecting with elm adapter. This app falls short in several ways. I have the upgraded version. I am updating this review to reflect my email corresponence with the developers of this app. My experience with them was quite positive. (1) The sensor data graphs stop taking data after 30 seconds and the trace is then slowly erased over the next 30 seconds, after which no more data is displayed. Update: This does not seem to be a common problem, nor has it been reported previously. I am using an ipad 3 running ios 9.1, so the issue may be due to this configuration specifically and in any case the developers were interested in addressing it. An ios issue is quite believable because I have experienced rendering issues in 9.x that were not present in earlier ios versions. For example, when zooming and panning on pdf files of schematics, lines disappear and get jumbled regardless of what app I use, which indicates an issue with ios 9.x in that instance. (2) It is impossible to overlap sensor data to make comparisons. Update: The developers informed me that this will be possible in the next update, so this issue is resolved. (3) The trouble code reset doesn't work properly. Update: This seems to also not have been previously reported, so again, it may be due to my ipad 3 and ios 9.1. The developers are looking into it. Overall, the developers seem to have taken my issues and suggestions seriously and I am looking forward to the update. I don't have any issues with the price and I would happily pay more for additional capabilities. I added a star to my rating based on my correspondence with the developers and will revise this again after checking out the next version.
  • Invaluable and outstanding tool.

    5
    By madmax-ooohhh
    Simple and easy to use interface, and very good response. Best OBD2 scan tool app I have used so far.
  • Keeps losing Connection

    2
    By Works A Bit
    Free version does next to nothing and constantly looses connection on GM and Ford, iOS 11.0.3 iPhone 7 and VEEPEAK Bluetooth. Why would I upgrade if free version keeps disconnecting?

Comments

keyboard_arrow_up